美人心计电视剧,美人心计电视剧,恐怖电影院2,tiktok海外直播网络专线,斗罗大陆200到300集免费观看,韩国电视剧在哪个app看,最近最火的电影,90000000000000000字作文,《公的浮之手中字》,海量好剧软件下载,复仇者联盟2在线观看完整版免费,两人世界免费高清观看,吴亦凡电影作品,97在线观看免费高清电视剧 ,锅盖头3:绝地反击,血战钢锯岭mp4,一壶老酒

，也要做到焊接方法規定！
4、電焊焊接電級：在突點電焊焊接全過程中，左右電級的平面度是十分關鍵的，假定電焊焊接電級高低不平，電焊焊接電流量會先穿過碰的地區，電流量會過度集中化在高地址上，導致突點遍布電流量不勻稱，進而造成濺出，危害外螺紋！

根據之上4點，大伙兒懂了焊接螺母是能夠保證無需回牙的

！要是有好的自動點焊機，有技術專業的焊接方法師及系統軟件的學習培訓，這種都能夠降低和防止的。

英文版：

Many customers will say that my automatic spot welding machine returns teeth when welding the nuts, and I don't know what the reason is. Rongshijie manufacturers will come and explain to everyone.
The key of automatic welding nut refers to the welding of metal sheet and full-automatic bump welding. The key of electric welding method is to choose the resistor hot-melt welding. To fully automatic multi-external threads welded by electric welding will not damage and will not return teeth. The key is 4 factors:
1. Welding working pressure of automatic spot welding machine: The welding working pressure of automatic spot welding machine is very related to the welding welding cylinder control board relay. The cylinder of Rong Shijie automatic spot welding machine uses well-known brand cylinders, plus imported solenoid valves To ensure the stability of the working pressure during the entire welding process of the automatic spot welder. It is assumed that the cylinder steering headlights are not good. At the moment of automatic welding, it is assumed that the cylinder steering headlights are not good. Immediately, the electric welding welding will be spattered. If the splashes enter the external threads, the external threads must be returned to the teeth.

46a29daece364625a4a48aced150158c_22

2. Electric welding welding current, in the case of welding nuts, most of the fully automatic are with bumps, the reliability of the electric welding welding current quantity, can reasonably block the welding spatter, automatic spot welding machine The use of an independent intermediate frequency AC and DC power supply, manipulating the welding time of ms, has the characteristics of fast welding speed and stable output current, which ensures the reliability of welding quality!
3. The adjustment of the main parameters of the welding method. In the case of adjusting the main parameters of the welding method, if the welding current is adjusted to be too large or the time is too long, it will affect the external thread of the welding nut. When you choose Rong Shijie's automatic spot welding machine, Rong Shijie's process engineers will adjust the main parameters of the appropriate welding method in accordance with your product processing technology regulations to ensure the external thread is also based on the welding method regulations!
4. Electric welding level: In the whole process of bump welding, the flatness of the left and right electric levels is very critical. Assuming that the electric level of the electric welding is uneven, the electric current of the electric welding will pass through the area where it touches. Excessive concentration on high addresses, causing uneven currents across the bumps, causing splashes and damaging external threads!
According to the above 4 points, everyone understands that welding nuts can ensure that no back teeth are required! If there is a good automatic spot welder, and there is a professional training of welding methods and system software, this can be reduced and prevented.